Custom Silicone & Button Manufacturing Since 2008
SM is the brand of Dongguan Sanmao Electronic Technology Co., Ltd., a manufacturer focused on silicone components, buttons, plastic parts, mold development and related product manufacturing.
The company was established in 2008 and moved its operations to Chang’an Town, Dongguan in 2014. Today, SM supports custom component projects that begin with drawings, samples, existing parts or product requirements.
Established 2008 · Dongguan Since 2014 · Silicone · Buttons · Plastic Components
Manufacturing Roots Since 2008
SM brings silicone, button, plastic and mold-development work together within one manufacturing organization. This gives buyers a practical starting point when a component project involves more than a single molded part.
2008
Company Established
2014
Dongguan Operations
2,500+ m²
Factory Area
90+
Employees
Dongguan Sanmao Electronic Technology Co., Ltd.
Dongguan Sanmao Electronic Technology Co., Ltd. traces its manufacturing roots to 2008, when the business operated as Shenzhen Sanmao Mould Plastic Co., Ltd. In 2014, the company moved to Chang’an Town, Dongguan.
The company operates across several product and manufacturing areas, including mobile phone buttons, silicone products, plastic components, mold development and product production. This combination allows SM to review not only the silicone or button itself, but also related plastic parts, tooling, decoration and assembly requirements when they belong to the same project.
For buyers, the practical starting point remains the product requirement: a drawing, STEP file, physical sample or existing component that needs to be developed, reproduced or improved.
Silicone, Buttons, Plastic Parts & Mold Development
SM’s manufacturing scope is built around component programs where molded parts, interface components and secondary processes need to work together.
Silicone Components
Custom molded silicone parts, keypads, buttons, mats, covers and other product-specific silicone components.
Button & Interface Components
Mobile-phone-style buttons, remote-control buttons, key structures and other user-interface components.
Plastic Components
Plastic parts and related interface pieces that may form part of the same assembly.
Mold Development
Mold development and tooling support for component production.
Production, Finishing & Tooling Under One Manufacturing Base
Our manufacturing setup covers vacuum vulcanization molding, printing, injection molding, spraying, laser engraving, mold-room machining and product inspection.
These processes support projects that require several stages to work together. Tooling defines the component geometry, molding creates the base part, secondary processes add markings or surface treatments where required, and inspection checks the finished result against the project requirements.
Start With the Component. Coordinate the Processes Around It.
A custom part may pass through several production and secondary-processing stages before it is ready for the finished product. SM’s working approach is to keep the project requirements aligned across those stages.
Start With the Requirement
Review the drawing, sample, geometry, markings and product application before defining the manufacturing route.
Develop the Tooling & Part
Define the mold and component structure around the approved requirements.
Coordinate Secondary Processes
Printing, spraying, laser engraving or other finishing requirements are considered together with the molded part where applicable.
Inspect the Finished Component
Inspection should reflect the appearance, dimensional, marking and assembly requirements defined for the project.
Inspection Capabilities for Product-Specific Requirements
Different components need different inspection priorities. Our inspection and testing resources support wear-related checks, dimensional measurement, force-related evaluation and temperature testing alongside routine production inspection.
The useful question is not whether every project receives every test. It is which checks are relevant to the part the buyer actually needs.
Typical review areas may include:
- appearance and visible surfaces
- printed or laser-marked details
- dimensional checks
- fit and assembly
- wear-related checks where applicable
- temperature-related testing where applicable
- comparison with approved samples or project requirements
A Manufacturing Team Across Production, Tooling & Inspection
Custom component manufacturing depends on more than equipment. Office coordination, tooling, molding, printing, injection, finishing and inspection all contribute to moving a project from requirements toward production.
Across our office and workshops, teams support tooling, molding, printing, injection, finishing and inspection as custom component projects move toward production.
Send Us Your Drawing, Sample or Product Requirement
If you have a silicone, button, plastic or interface component to review, send the information you already have and tell us how the part needs to fit into the finished product.
WhatsApp: +86 139 2371 9827
No. 1, Shangjiao Xinju Road, Chang’an Town, Dongguan, Guangdong, China.